RS485 and 4-20mA temperature and humidity transmitter PC Replacement Probe

商品番号  HG803-7W4P-02

The HG803 Interchangeable Probe Transmitter is paired
with a cost-effective detachable and replaceable
probe. The detachable probe design allows for independent
disassembly and replacement of the probe module
and transmitter module.

RS485 and 4-20mA both Output

製品のハイライト

1.Integrated split structure design, lightweight and convenient.
2.Easy to replace and r educe equipment maintenance costs
3.High cost-effectiveness, reliable and affordable
4.Suitable for sensor vulnerable temperature and humidity
measurement scenarios, such as smart farming, smart
agriculture, etc

仕様

* Temperature Range: -40~100°℃(Plastic lnterchangeable probe)
* Temperature Accuracy: 土0.3°℃(25°C) ,(Higher precision is customizable)Humidity Range: 0~100% RH
* 湿度精度: 士3%RH(60%RH, 25°C)(Higher precision is customizable) 

* Long-term Temperature Stability: ≤0.1°C/y

* Long-term Humidity stability: ≦1%RH/y
* signal output : 4-20 mA temperature and humidity two analog capacity + RS485 signal output
* Baud rate: 1200、2400、4800、9600、19200、115200 can set, default is 9,600 pbs
* Transmitter Circuit operating Temperature: -20°℃~+60°℃, 0%RH~95%RH,Non-knot dew supports both single-register and multiple-register reads
* Industrial grade ESD safety protection and power supply reverse protection design supports both single-register and multiple-register reads
* Digital output can set the output of 0.1 or 0.01 resolution

HG803データシート詳細

技術データ説明
DC電源DC10~30V(12Vを推奨)
最大消費電力約1.2W
電流出力約1.2W
電圧出力約1.2W
標準精度(温度)±0.3℃ (25℃) / ±0.54℉ (77℉)
標準精度(湿度)±3%RH(60%RH、25)
測定媒体空気
測定範囲(温度)-40℃ ~ 80℃ / -40℉ ~ 176℉(デフォルト)
測定範囲(湿度)0%RH - 100%RH
長期安定性(温度)≤ 0.1℃ /y
長期安定性(湿度)≤ 1%RH /y
応答時間(湿度)≤ 8s (1m/s 風速)
応答時間(温度)≤ 15s (1m/s 風速)
アナログ出力信号電流 4 - 20 mA
デジタル出力RS485通信(Modbus)プロトコル
データ・ビット長8ビット
パリティチェックモードなし
ストップビット長1ビット
デフォルトModbus通信アドレス1
機能コード03
ボーレート1200、2400、4800、9600、19200、115200(オプション、デフォルト9600bps)
負荷容量(電流出力)≤ 600Ω
負荷容量(出力電圧)≤ 250Ω
トランスミッタ回路動作温度-20℃~+60℃、0%RH~95%RH(非凝縮時)

インスタレーションについて

HG803ワイヤーコネクト取付図

4-20mA+RS485アナログ出力タイプの配線規格

ラインカラー定義仕様
電源コード  
レッド電源プラス10 ~ 30V DC
ブラック電源マイナスGND
アナログ出力ライン  
ブラウン温度信号正4-20mA出力
ブルー温度信号負黒(GND)に接続
グレー湿度信号 正4-20mA出力
ホワイト湿度信号負黒(GND)に接続
RS485配線  
イエローRS485Aツイストペアケーブル
グリーンRS485Bツイストペアケーブル

その他の注意事項

  • 耐荷重:
    • 現在の出力: ≤ 600Ω
    • 電圧出力(この表では該当なし):≦250Ω
  • 適用モデル: HG803-1W4P、HG803-2W4P、HG803-3W4P、HG803-4W4P、HG803-5C4P、HG803-6C4P、HG803-7W4P、HG803-8W4P
 

重要だ:

  • 具体的な接続方法と追加要件については、デバイスのマニュアルを参照してください。
  • RS485バスの終端抵抗が、デバイスのマニュアルや関連する通信規格に従って適切に使用されていることを確認してください。
  • 適切な知識と資格なしに電気配線を試みないでください。
  •  

アプリケーション

これらのトランスミッタは、様々な産業プラント、クリーンルーム、研究室、機械室、商業ビル、空港、学校での室内空気温湿度モニタリングに使用できます。 

Modbusインターフェースは文書化されており、インテグレーターフレンドリーです。また、一般的な制御システムにアナログ入力として接続するための変換器出力も備えています。 

様々なモデルが用意されている:

ダクトマウント、

ウォールマウント、ルームマウント、2メートルケーブル。 

RS485上のModbus RTUプロトコル、イーサネットポート付き。

製品マニュアル / 認証 / ソフトウェアのダウンロード

2.その他をすべてチェックする ダウンロードファイル

ブログ

関連商品

最近のソーシャル投稿の画像を紹介するギャラリーです。

お問い合わせ

jaJapanese

お問い合わせ

お問い合わせは下記までお気軽にどうぞ: