Dust, moisture & condensation attack open sensors
Unprotected humidity elements foul or drift when dust and condensate reach the sensing film.
- Porous stainless / plastic caps
- IP66 enclosure options
- Shielded ambient & process RH
Spec the right HG803 — mount, probe, and output in three steps.
Six field pains — dust, duct air, PLC signals, harsh installs, service downtime, and dew-point blind spots — and how HG803 probe design and outputs address them.
Unprotected humidity elements foul or drift when dust and condensate reach the sensing film.
Room transmitters miss stratified supply/return air — lag, condensation risk, wasted energy.
Projects stall when you have RS485 but need 4-20mA — or operators need a local readout.
Electronics cannot sit in the hot or hard-to-reach point; threaded or flanged stems are required.
In dirty or high-RH service, replacing the whole head is costly when only the probe aged out.
Tracking %RH alone misses when surfaces will wet — cold rooms, ducts, and dryers need dew point.
Mount type → probe style → output & display. We recommend 1–3 model codes you can quote or open in the compare table.
Ausgabe
Display
Browse by installation family, then open the filtered compare table for every SKU and output option.

Remote probe + wall-mounted transmitter for industrial ambient and process points. Plastic or stainless probes (standard, threaded, short/long flange).

Field-replaceable plastic probe — swap sensors without rewiring the transmitter head in high-humidity service.

Compact all-in-one plastic body for rooms, cabinets, and general ambient monitoring.

Flange and screw duct probes (15 cm / 20 cm SS or plastic flange) for AHUs and HVAC air streams.
Not sure which of 76 models? Tell us your mount and PLC input — we will reply with a 3-model shortlist, typically within 24 hours.
Get a shortlistTap an application to prefill your inquiry — we will recommend probe and output for that environment.
Supply/return duct T&H for comfort control, dehumidification, and condensation prevention. Prefer duct flange or screw probes.
Request quoteAmbient monitoring with wall-mounted split or integrated units; RS485 networks for multi-zone logging.
Request quoteStable humidity and dew-point awareness for crop climate control; plastic probes for milder chemical exposure.
Request quoteControlled environments needing reliable T/RH transmission to BMS — discuss calibration and display needs with sales.
Request quoteProcess areas where dust, wash-down adjacency, and stainless probes matter; dual 4-20mA+RS485 for plant PLCs.
Request quoteRoom and rack-adjacent humidity control to protect equipment; integrated or split plastic probes with Modbus RS485.
Request quoteHover Model, Display, or Probe for a thumbnail; click to open a large image. Filter by series, output, and display. On a phone, tap a selector option to preview its photo, and tap a model or probe name in the table to enlarge.
| Modell | Sonde Typ | Ausgabe | Display | Measurement | Temperaturbereich | Probe / Application | CTA |
|---|---|---|---|---|---|---|---|
| Remote Probe | RS485 Dew Point | Dew Point / Temp & Humidity | -40~100°C | Plastic protective cap; water- and dust-resistant; IP66; work <80°C |
Contact | ||
| Remote Probe | RS485 Dew Point | Dew Point / Temp & Humidity | -40~100°C | Plastic protective cap; water- and dust-resistant; IP66; work <80°C |
Contact | ||
| Remote Probe | 4-20mA + RS485 | Temperatur und Luftfeuchtigkeit | -40~100°C | Plastic protective cap; water- and dust-resistant; IP66; work <80°C |
Contact | ||
| Remote Probe | 4-20mA + RS485 | Temperatur und Luftfeuchtigkeit | -40~100°C | Plastic protective cap; water- and dust-resistant; IP66; work <80°C |
Contact | ||
| Remote Probe | 0-5V + RS485 | Temperatur und Luftfeuchtigkeit | -40~100°C | Plastic protective cap; water- and dust-resistant; IP66; work <80°C |
Contact | ||
| Remote Probe | 0-5V + RS485 | Temperatur und Luftfeuchtigkeit | -40~100°C | Plastic protective cap; water- and dust-resistant; IP66; work <80°C |
Contact | ||
| Remote Probe | 0-10V + RS485 | Temperatur und Luftfeuchtigkeit | -40~100°C | Plastic protective cap; water- and dust-resistant; IP66; work <80°C |
Contact | ||
| Remote Probe | 0-10V + RS485 | Temperatur und Luftfeuchtigkeit | -40~100°C | Plastic protective cap; water- and dust-resistant; IP66; work <80°C |
Contact | ||
| Remote Probe | RS485 Dew Point | Dew Point / Temp & Humidity | -40~120°C | Stainless steel protective cap; IP66; work <110°C |
Contact | ||
| Remote Probe | RS485 Dew Point | Dew Point / Temp & Humidity | -40~120°C | Stainless steel protective cap; IP66; work <110°C |
Contact | ||
| Remote Probe | 4-20mA + RS485 | Temperatur und Luftfeuchtigkeit | -40~120°C | Stainless steel protective cap; IP66; work <110°C |
Contact | ||
| Remote Probe | 4-20mA + RS485 | Temperatur und Luftfeuchtigkeit | -40~120°C | Stainless steel protective cap; IP66; work <110°C |
Contact | ||
| Remote Probe | 0-5V + RS485 | Temperatur und Luftfeuchtigkeit | -40~120°C | Stainless steel protective cap; IP66; work <110°C |
Contact | ||
| Remote Probe | 0-5V + RS485 | Temperatur und Luftfeuchtigkeit | -40~120°C | Stainless steel protective cap; IP66; work <110°C |
Contact | ||
| Remote Probe | 0-10V + RS485 | Temperatur und Luftfeuchtigkeit | -40~120°C | Stainless steel protective cap; IP66; work <110°C |
Contact | ||
| Remote Probe | 0-10V + RS485 | Temperatur und Luftfeuchtigkeit | -40~120°C | Stainless steel protective cap; IP66; work <110°C |
Contact | ||
| Remote Probe | RS485 Dew Point | Dew Point / Temp & Humidity | -40~120°C | Threaded SS porous metal probe; IP66; work <110°C |
Contact | ||
| Remote Probe | RS485 Dew Point | Dew Point / Temp & Humidity | -40~120°C | Threaded SS porous metal probe; IP66; work <110°C |
Contact | ||
| Remote Probe | 4-20mA + RS485 | Temperatur und Luftfeuchtigkeit | -40~120°C | Threaded SS porous metal probe; IP66; work <110°C |
Contact | ||
| Remote Probe | 4-20mA + RS485 | Temperatur und Luftfeuchtigkeit | -40~120°C | Threaded SS porous metal probe; IP66; work <110°C |
Contact | ||
| Remote Probe | 0-5V + RS485 | Temperatur und Luftfeuchtigkeit | -40~120°C | Threaded SS porous metal probe; IP66; work <110°C |
Contact | ||
| Remote Probe | 0-5V + RS485 | Temperatur und Luftfeuchtigkeit | -40~120°C | Threaded SS porous metal probe; IP66; work <110°C |
Contact | ||
| Remote Probe | 0-10V + RS485 | Temperatur und Luftfeuchtigkeit | -40~120°C | Threaded SS porous metal probe; IP66; work <110°C |
Contact | ||
| Remote Probe | 0-10V + RS485 | Temperatur und Luftfeuchtigkeit | -40~120°C | Threaded SS porous metal probe; IP66; work <110°C |
Contact | ||
| Remote Probe | RS485 Dew Point | Dew Point / Temp & Humidity | -40~120°C | Short flange SS probe; wall/pipe mount; IP66; work <110°C |
Contact | ||
| Remote Probe | RS485 Dew Point | Dew Point / Temp & Humidity | -40~120°C | Short flange SS probe; wall/pipe mount; IP66; work <110°C |
Contact | ||
| Remote Probe | 4-20mA + RS485 | Temperatur und Luftfeuchtigkeit | -40~120°C | Short flange SS probe; wall/pipe mount; IP66; work <110°C |
Contact | ||
| Remote Probe | 4-20mA + RS485 | Temperatur und Luftfeuchtigkeit | -40~120°C | Short flange SS probe; wall/pipe mount; IP66; work <110°C |
Contact | ||
| Remote Probe | 0-5V + RS485 | Temperatur und Luftfeuchtigkeit | -40~120°C | Short flange SS probe; wall/pipe mount; IP66; work <110°C |
Contact | ||
| Remote Probe | 0-5V + RS485 | Temperatur und Luftfeuchtigkeit | -40~120°C | Short flange SS probe; wall/pipe mount; IP66; work <110°C |
Contact | ||
| Remote Probe | 0-10V + RS485 | Temperatur und Luftfeuchtigkeit | -40~120°C | Short flange SS probe; wall/pipe mount; IP66; work <110°C |
Contact | ||
| Remote Probe | 0-10V + RS485 | Temperatur und Luftfeuchtigkeit | -40~120°C | Short flange SS probe; wall/pipe mount; IP66; work <110°C |
Contact | ||
| Remote Probe | RS485 Dew Point | Dew Point / Temp & Humidity | -40~120°C | Long flange SS probe; deeper insertion; IP66; work <110°C |
Contact | ||
| Remote Probe | RS485 Dew Point | Dew Point / Temp & Humidity | -40~120°C | Long flange SS probe; deeper insertion; IP66; work <110°C |
Contact | ||
| Remote Probe | 4-20mA + RS485 | Temperatur und Luftfeuchtigkeit | -40~120°C | Long flange SS probe; deeper insertion; IP66; work <110°C |
Contact | ||
| Remote Probe | 4-20mA + RS485 | Temperatur und Luftfeuchtigkeit | -40~120°C | Long flange SS probe; deeper insertion; IP66; work <110°C |
Contact | ||
| Remote Probe | 0-5V + RS485 | Temperatur und Luftfeuchtigkeit | -40~120°C | Long flange SS probe; deeper insertion; IP66; work <110°C |
Contact | ||
| Remote Probe | 0-5V + RS485 | Temperatur und Luftfeuchtigkeit | -40~120°C | Long flange SS probe; deeper insertion; IP66; work <110°C |
Contact | ||
| Remote Probe | 0-10V + RS485 | Temperatur und Luftfeuchtigkeit | -40~120°C | Long flange SS probe; deeper insertion; IP66; work <110°C |
Contact | ||
| Remote Probe | 0-10V + RS485 | Temperatur und Luftfeuchtigkeit | -40~120°C | Long flange SS probe; deeper insertion; IP66; work <110°C |
Contact | ||
| Integrierte Sonde | RS485 Dew Point | Dew Point / Temp & Humidity | -20~60°C | Compact plastic integrated body; ambient monitoring |
Contact | ||
| Integrierte Sonde | RS485 Dew Point | Dew Point / Temp & Humidity | -20~60°C | Compact plastic integrated body; ambient monitoring |
Contact | ||
| Integrierte Sonde | 4-20mA + RS485 | Temperatur und Luftfeuchtigkeit | -20~60°C | Compact plastic integrated body; ambient monitoring |
Contact | ||
| Integrierte Sonde | 4-20mA + RS485 | Temperatur und Luftfeuchtigkeit | -20~60°C | Compact plastic integrated body; ambient monitoring |
Contact | ||
| Integrierte Sonde | 0-5V + RS485 | Temperatur und Luftfeuchtigkeit | -20~60°C | Compact plastic integrated body; ambient monitoring |
Contact | ||
| Integrierte Sonde | 0-5V + RS485 | Temperatur und Luftfeuchtigkeit | -20~60°C | Compact plastic integrated body; ambient monitoring |
Contact | ||
| Integrierte Sonde | 0-10V + RS485 | Temperatur und Luftfeuchtigkeit | -20~60°C | Compact plastic integrated body; ambient monitoring |
Contact | ||
| Integrierte Sonde | 0-10V + RS485 | Temperatur und Luftfeuchtigkeit | -20~60°C | Compact plastic integrated body; ambient monitoring |
Contact | ||
| Remote Probe (Replaceable) | RS485 Dew Point | Dew Point / Temp & Humidity | -40~100°C | Replaceable plastic probe; high-humidity friendly; work <80°C |
Contact | ||
| Remote Probe (Replaceable) | RS485 Dew Point | Dew Point / Temp & Humidity | -40~100°C | Replaceable plastic probe; high-humidity friendly; work <80°C |
Contact | ||
| Remote Probe (Replaceable) | 4-20mA + RS485 | Temperatur und Luftfeuchtigkeit | -40~100°C | Replaceable plastic probe; high-humidity friendly; work <80°C |
Contact | ||
| Remote Probe (Replaceable) | 4-20mA + RS485 | Temperatur und Luftfeuchtigkeit | -40~100°C | Replaceable plastic probe; high-humidity friendly; work <80°C |
Contact | ||
| Remote Probe (Replaceable) | 0-5V + RS485 | Temperatur und Luftfeuchtigkeit | -40~100°C | Replaceable plastic probe; high-humidity friendly; work <80°C |
Contact | ||
| Remote Probe (Replaceable) | 0-5V + RS485 | Temperatur und Luftfeuchtigkeit | -40~100°C | Replaceable plastic probe; high-humidity friendly; work <80°C |
Contact | ||
| Remote Probe (Replaceable) | 0-10V + RS485 | Temperatur und Luftfeuchtigkeit | -40~100°C | Replaceable plastic probe; high-humidity friendly; work <80°C |
Contact | ||
| Remote Probe (Replaceable) | 0-10V + RS485 | Temperatur und Luftfeuchtigkeit | -40~100°C | Replaceable plastic probe; high-humidity friendly; work <80°C |
Contact | ||
| Duct-Mounted Probe | RS485 Dew Point | Dew Point / Temp & Humidity | -40~80°C | Air ducts / HVAC; plastic flange |
Contact | ||
| Duct-Mounted Probe | RS485 Dew Point | Dew Point / Temp & Humidity | -40~80°C | Air ducts / HVAC; plastic flange |
Contact | ||
| Duct-Mounted Probe | 4-20mA + RS485 | Temperatur und Luftfeuchtigkeit | -40~80°C | Air ducts / HVAC; plastic flange |
Contact | ||
| Duct-Mounted Probe | 4-20mA + RS485 | Temperatur und Luftfeuchtigkeit | -40~80°C | Air ducts / HVAC; plastic flange |
Contact | ||
| Duct-Mounted Probe | RS485 Dew Point | Dew Point / Temp & Humidity | -40~80°C | Duct flange mount; 15 cm SS probe |
Contact | ||
| Duct-Mounted Probe | RS485 Dew Point | Dew Point / Temp & Humidity | -40~80°C | Duct flange mount; 15 cm SS probe |
Contact | ||
| Duct-Mounted Probe | 4-20mA + RS485 | Temperatur und Luftfeuchtigkeit | -40~80°C | Duct flange mount; 15 cm SS probe |
Contact | ||
| Duct-Mounted Probe | 4-20mA + RS485 | Temperatur und Luftfeuchtigkeit | -40~80°C | Duct flange mount; 15 cm SS probe |
Contact | ||
| Duct-Mounted Probe | RS485 Dew Point | Dew Point / Temp & Humidity | -40~80°C | Duct flange mount; 20 cm SS probe |
Contact | ||
| Duct-Mounted Probe | RS485 Dew Point | Dew Point / Temp & Humidity | -40~80°C | Duct flange mount; 20 cm SS probe |
Contact | ||
| Duct-Mounted Probe | 4-20mA + RS485 | Temperatur und Luftfeuchtigkeit | -40~80°C | Duct flange mount; 20 cm SS probe |
Contact | ||
| Duct-Mounted Probe | 4-20mA + RS485 | Temperatur und Luftfeuchtigkeit | -40~80°C | Duct flange mount; 20 cm SS probe |
Contact | ||
| Duct-Mounted Probe | RS485 Dew Point | Dew Point / Temp & Humidity | -40~80°C | Duct screw/thread mount; 15 cm SS probe |
Contact | ||
| Duct-Mounted Probe | RS485 Dew Point | Dew Point / Temp & Humidity | -40~80°C | Duct screw/thread mount; 15 cm SS probe |
Contact | ||
| Duct-Mounted Probe | 4-20mA + RS485 | Temperatur und Luftfeuchtigkeit | -40~80°C | Duct screw/thread mount; 15 cm SS probe |
Contact | ||
| Duct-Mounted Probe | 4-20mA + RS485 | Temperatur und Luftfeuchtigkeit | -40~80°C | Duct screw/thread mount; 15 cm SS probe |
Contact | ||
| Duct-Mounted Probe | RS485 Dew Point | Dew Point / Temp & Humidity | -40~80°C | Duct screw/thread mount; 20 cm SS probe |
Contact | ||
| Duct-Mounted Probe | RS485 Dew Point | Dew Point / Temp & Humidity | -40~80°C | Duct screw/thread mount; 20 cm SS probe |
Contact | ||
| Duct-Mounted Probe | 4-20mA + RS485 | Temperatur und Luftfeuchtigkeit | -40~80°C | Duct screw/thread mount; 20 cm SS probe |
Contact | ||
| Duct-Mounted Probe | 4-20mA + RS485 | Temperatur und Luftfeuchtigkeit | -40~80°C | Duct screw/thread mount; 20 cm SS probe |
Contact |
Showing 76 of 76 models
Encoding: 1/3/5/7 = no display · 2/4/6/8 = with display · 8P ≈ RS485 dew point · 4P ≈ 4-20mA+RS485 · 5P ≈ 0-5V+RS485 · 1P ≈ 0-10V+RS485. Photos: exact model when available, else closest probe-family image from hengkometer.com.
Seen the matrix? Send 1–3 candidate codes — we confirm probe, output, and cable length before you purchase.
Confirm my shortlistThree decisions cover most HG803 projects — then confirm output with your PLC or BMS.
Wall / remote process → Split. Compact room → Integrated. Air duct → Duct flange or screw. Need probe swaps → Replaceable.
Plastic for milder ambient; stainless for dust and higher temperature. Threaded or flanged stems for insertion depth.
Modbus RS485 with dew point, dual 4-20mA + RS485, or 0-5V / 0-10V + RS485. Add LCD when operators need a local readout.
Short walkthrough of the industrial HG803 platform — probe styles, display, and how teams specify RS485 / 4-20mA transmitters for real installs.
Watch on YouTube, then shortlist models with the selector or send your mount and PLC input for a quote.
Facts below come from HENGKO’s HG803 manuals and catalogue. Review the documents, then talk to engineering about your SKU mix.
sales@hengkometer.com · +86-755-88823250 · OEM / ODM project support
Brand marks shown on hengkometer.com under “Trusted by 100 world-class brands and organizations.” Logos are site assets for social proof — not a claim of exclusive partnership.
HENGKO manufactures the HG803 platform for project OEMs, HVAC wholesalers, and integrators who need probe, cable, output, and branding options without starting a new transmitter family.
Share environment, preferred output, and volume band — engineering returns an HG803 shortlist from the manufacturer catalogue (no invented prices on this page).
No fake countdown timers — just a fast engineering reply grounded in how HENGKO already supports customize, OEM, and partner marketing.
Commercial strengths for distributors, HVAC wholesalers, and OEM buyers specifying HENGKO temperature humidity transmitters.
Customize dew point transmitter and probe configurations based on HENGKO’s self-designed HG803 platform.
Cost-effective manufacturing for project volumes and distributor programs — request a quote for your SKU mix.
Ongoing upgrades so your catalogue keeps pace with industrial and HVAC market needs.
High-resolution images, 3D-effect videos, and sales materials to help partners sell successfully.
Concise answers for engineers specifying industrial dew point, RS485, and 4-20mA humidity transmitters.
The HENGKO HG803 is an industrial temperature humidity transmitter family for HVAC ducts, warehouses, greenhouses, and process rooms. It measures temperature and relative humidity, calculates dew point on digital models, and outputs RS485 Modbus and/or 4-20mA (IP66 enclosure options) to a PLC, BMS, or recorder. Manufacturer site: hengkometer.com.
Most industrial transmitters use capacitive polymer elements: moisture changes the dielectric of a sensing film, converted to %RH. Temperature is measured separately; dew point can be calculated on digital RS485 models.
4-20mA is a noise-resistant industrial current loop for long cable runs and wide PLC compatibility. HG803 dual-output models combine 4-20mA with RS485 for analog points plus a digital bus.
HVAC ducts and AHUs, warehouses and cold chain, greenhouses, pharma/cleanroom monitoring, food processing, and data centers / telecom rooms. Use the Applications tiles to prefill your inquiry for that use case.
Use the on-page selector: mount first, then probe material/length, then output and display. Match temperature range and IP66 environment to your process.
Example HG803-2W8P-04: display digit (1/3/5/7 = no display, 2/4/6/8 = with display), output (8P dew-point RS485, 4P 4-20mA+RS485, 5P 0-5V+RS485, 1P 0-10V+RS485), suffix for probe style.
Yes. OEM/ODM customization on the HG803 platform (probe geometry, cable length, output mix). Contact sales@hengkometer.com or +86-755-88823250.
HG803 Temperature and Humidity Transmitter Manual (PDF) and the 2024 Temperature Humidity Sensor Catalogue are linked in the Proof section above on hengkometer.com.
When HG803 ambient / duct ranges are not enough, these verified HENGKO pages cover high-temperature dew point, inline process dew point, and the full dew-point transmitter category.
Industrial dew point transmitter for elevated process temperatures — RS485 / analog options on the HG808 platform.
View HG808-D →
Inline dew point sensor with 4-20mA and RS485 for compressed air and process lines needing tighter dew-point control.
View HG602 →
Browse HENGKO dew point transmitters for compressed air, HVAC, and industrial process monitoring — manufacturer overview.
Browse dew point transmitters →Model and application fields auto-fill from selector, table, and application CTAs. We confirm probe, output, cable length, and lead time.
WhatsApp uns