Item Number: HG803-4W4P-12
*The HG803 Air Duct Series Transmitter is equipped with a sensitive waterproof and anti fine dust high-temperature probe, with a temperature range of -40~80 ℃.
*Adopting standard industrial interface RS485 digital signal out put or 4-20 mA analog output, with display function, it can be connected to on-site digital display meters, PLCs, frequency converters, industrial control hosts an d other equipment.
Modbus RS485 + 4-20mA Both Output
▪Integrated design, simple and elegant
▪Industrial grade ESD safety protection and power supply anti reverse connection design
▪Using waterproof, dustproof, and high-temperature resistant probes
▪Sensitive waterproof and anti fine dust high-temperature probe
▪Standard RS485 Modbus RTU communication protocol
▪High precision, high stability, LP66 waterproof and Dustproof level
▪Multiple probe materials available
* Temperature Range: -40~80°℃(Plastic conjoined probe)
* Temperature Accuracy:土0.3°℃(25°C) ,(Higher precision is customizable)
* Humidity Range: 0~100% RH
* Humidity Accuracy:土3%RH(60%RH,25°C)(Higher precision is customizable)Long-term Temperature Stability: ≤0.1°C/y
* Long-term Humidity Stability: ≤1%RH/y
* Signal Output : ①The RS485 signal output or @4-20 mA temperature and humidity two analog capacity + RS485 signal output
* Baud rate: 1200、2400、4800、9600、19200、115200can set, Default is 9,600 pbs
* Transmitter circuit operating temperature: -20°C~+60℃,0%RH~95%RH,Non-knot dew Supports both single-register and multiple-register reads
* Industrial grade ESD safety protection and power supply reverse protection design
* Sensitive waterproof and fine dust high temperature resistant probe
*Digital output can set the output of 0.1 or 0.01 resolution
*Analog output with a resolution of 15 bits
| Technical Data | Description |
|---|---|
| DC power supply | 10 ~ 30V DC (12V recommended) |
| Maximum power consumption | About 1.2W |
| Current output | About 1.2W |
| Voltage output | About 1.2W |
| Typical accuracy (Temperature) | ±0.3℃ (25℃) / ±0.54℉ (77℉) |
| Typical accuracy (Humidity) | ±3%RH (60%RH, 25℃) |
| Measuring medium | Air |
| Measuring range (Temperature) | -40℃ ~ 80℃ / -40℉ ~ 176℉ (default) |
| Measuring range (Humidity) | 0%RH – 100%RH |
| Long-term stability (Temperature) | ≤ 0.1℃ /y |
| Long-term stability (Humidity) | ≤ 1%RH /y |
| Response time (Humidity) | ≤ 8s (1m/s Wind speed) |
| Response time (Temperature) | ≤ 15s (1m/s Wind speed) |
| Analog output | Signal Current 4 – 20 mA |
| Digital output | RS485 Communication (Modbus) protocol |
| Data bit length | 8 bits |
| Parity check mode | None |
| Stop bit length | 1 bit |
| Default Modbus communication address | 1 |
| Function code | 03 |
| Baud rate | 1200, 2400, 4800, 9600, 19200, 115200 (optional, default 9600 bps) |
| Load capacity (Current output) | ≤ 600Ω |
| Load capacity (Voltage output) | ≤ 250Ω |
| Transmitter circuit operating temperature | -20℃ ~ +60℃, 0%RH ~ 95%RH (non-condensation) |
| Line Color | Definition | Specification |
|---|---|---|
| Power Cord | ||
| Red | Power supply positive | 10 ~ 30V DC |
| Black | Power supply negative | GND |
| Analog Output Lines | ||
| Brown | Temperature signal positive | 4-20mA output |
| Blue | Temperature signal negative | Connects to Black (GND) |
| Grey | Humidity signal positive | 4-20mA output |
| White | Humidity signal negative | Connects to Black (GND) |
| RS485 Wiring | ||
| Yellow | RS485A | Twisted pair cable |
| Green | RS485B | Twisted pair cable |
Additional Notes:
Important:
These transmitters can be used for indoor air temperature and humidity monitoring in various industrial plant, clean room, lab, machine room, commercial buildings, airport, and schools.
The modbus interface is documented and integrator friendly. They also have transducer outputs for connecting as analog inputs to all popular control systems.
Various models are available:
Duct Mount,
Wall Mount,Room Mount and 2 meter cable.BACnet MS/TP and
Modbus RTU protocols over RS485,with an ethernet port.
The Role of Temperature and Humidity Monitoring Temperature and humidity transmitters are essential tools for modern dehumidification systems, providing real-time data on environmental conditions. By
In short, Humidity and temperature transmitters measure and send environmental data to control systems. They are widely used in HVAC, pharmaceuticals, food processing, and cleanrooms
Why Are Dryer Dew Point Meters Critical for Compressed Air Systems? Maybe You always battle hidden moisture in compressed air that can cause corrosion, freezing,
Why One Office Zone is Too Humid & How a Humidity Transmitter Fixes It Persistent humidity in one office zone can disrupt comfort, increase mold
Introduction Compressed air is often referred to as the “fourth utility” in modern industry, alongside electricity, water, and gas. Yet, one of the most common
1. Introduction The semiconductor industry operates under some of the most stringent environmental conditions of any manufacturing sector. As devices shrink to the nanoscale and
Introduction In the world of environmental simulation and reliability testing, constant temperature and humidity chambers are indispensable tools across a wide range of industries—from electronics
Are you grappling with how dew point sensors impact industrial efficiency? These sensors play a crucial role in maintaining environmental control, preventing corrosion, and ensuring
Why do generic sensors keep failing in cold chain environments? Because they simply aren’t built for it. Cold chain logistics demand precision, durability, and rapid
In modern biomanufacturing, fermentation is a critical step that directly affects product yield, purity, and consistency—whether it’s for antibiotics, enzymes, amino acids, or biofuels. Behind
This is a gallery to showcase images from your recent social posts
English 
Spanish 
Portuguese 
Russian 
German 
French 
Italian 
Indonesian 
Japanese 
Korean 
Romanian 
Lithuanian 
Polish 
Ukrainian 
Greek 
Hungarian 
Swedish